Formability of magnesium alloy sheetMagnesium and its magnesium alloys have many advantages, such as light weight, good heat and conductivity, damping and shock absorption, electromagnetic shielding, etc., which have broad application prospects in the fields of transportation, communication, electri

Phosphorus is a process of reaction of metal and dilute phosphate or acid phosphate solution to form a phosphate protective film. It is one of the ways to replace the treatment of poisonous chromate. On the surface of the metal, it generates a layer of non -metal, non -conductive, porous phosphate t

The ratio of magnesium alloys is higher than the aluminum alloy and steel, slightly lower than the fiber enhanced plastic with the highest strength, which is comparable to that of aluminum alloy and steel. So is it like other metals when performing alkaline heat treatment, the following editors will

Special rolling2.1 asynchronous rolling (DSR)The principle of asynchronous rolling is shown in Figure 3 below. It changes the speed of the surface of the two working rollers by changing the diameter, speed, and friction conditions of the upper and lower rolls. The friction horizontal pressure has a

Magnesium alloys are the lightest metal structure materials in the actual application. At the same time, magnesium alloy has high strength and high stiffness, large elastic modulus, good biocompatibility, good thermal conductivity, strong electromagnetic shielding ability, and damping shock absorpti

The etching processing methods of magnesium and alloys are as follows:Mg is a very active metal and can react with a variety of acids. Among them, the corrosive solution based on H2S04 is easier to control and has been widely used in chemical etching of aviation parts. The reaction formula is as fol