Riveting, as a mechanical connection method with a long history, is still widely used in today's manufacturing industry. Common rivets are made of steel, copper, or aluminum alloys and other materials. Under the general trend of lightweighting of mechanical structures, more and more magnesium alloy

In August, Hot Sales,50 pcs etching magnesium plates are packed for delivering to our customer in Korea. High quality etching magnesium plates with good packaging.Etched plateIt is made of semi-continuously cast magnesium alloy ingots that are extruded by a 10,000-ton press, soaked in a soaking furn

Overview  The density of magnesium alloy is 23% of steel, 67% of aluminum, and 170% of plastic. It is the lightest metal in metal structural materials. The yield strength of magnesium alloy is roughly the same as that of aluminum alloy, only slightly lower than that of carbon steel. It is plas

Magnesium and magnesium alloys can be cut by hand saw and power saw. Due to the small cutting force, the saw edge can be very deep. Therefore, the saw blade should have a large chip groove for flexible sawing. If the chip groove is too small, it will Quickly fill up the saw teeth to disengage the sa

In etching processing, hydrochloric acid is an important additive potion. But how much is appropriate, this must have a benign understanding. Both acidity and acidity have a great influence on product quality. The amount of hydrochloric acid can be measured by the pH value. The following is the anal

In July 2022, HOT SALES, 450pc plates are packed for delivering to customer in Turkish.

In July 2022, HOT SALES, etching machine，etching machine, shearing machine and exposure machine are packed for delivering to customer in Ecuador.

In the chemical etching process method, the parts or parts that have been coated with a graphic anti-corrosion layer are placed in the corrosive solution for corrosion, and the corrosion is continued until the metal thickness reaches the requirements or the graphic depth reaches the requirements. In