Turkish costumer order 30 pcs good quality magnesium etching plate

In October, Hot Sales, 30 pcs etching magnesium plates are packed for delivering to our customer in Turkey. High quality magnesium etching plates with good packaging.

This passage let us konw the performance will be better，if the etching speed in the etching process is faster.

In the etching process, the speed is a very important processing parameter. The speed of etching determines the processing cycle and product quality. The faster the speed, the shorter the processing cycle, and the higher the production efficiency, but the faster the speed is?

Coexistence

Let ’s take a brief introduction to the etching.

1) The faster the etching speed, the greater the etching volume in the unit time, the increase in the fever, and the change of the speed of the etching solution, which will not be conducive to the constant speed of the speed. 

2) If the etching speed is too fast, it will be difficult to control for parts with more accurate depth requirements.

3) The faster the etching process, the lower the quality of the surface treatment, which will affect the gloss of the metal surface

4) Fast etching speed often requires high corrosive chemical reagents and high etching temperatures. These factors increase the cost of etching agent and also increase the requirements for anticorrosive layers, which increases costs. In addition, this will increase the environmental pollution.

Therefore, the faster the etching speed in the etching process is better.

In actual production, you can choose to get fast before the production of mass production. What is fast first and then slow? It is the etching solution that has a fast etch speed first etched once. After meeting the design requirements, it is precisely etched at a slow etching solution at a slow speed. Although a process is added, the processing time is shortened and the etching accuracy and surface gloss are guaranteed.