In Jan, HOTSALES, Indonesia customer order 3 cartons zinc plates.

In Jan, HOTSALES, 3 Cartons zinc plates are packed for delivering to our customer in Indonesia.High quality zinc plates with good packing.

Bronzing is a common printing and processing technology. If you want to make more delicate prints, bronzing is usually a good choice. Dongfang first used this technology to make money in the Song Dynasty, that is, the banknotes of the Northern Song Dynasty. In the past, people's bronzing would be made of real gold or silver foil, but in modern times, anodized aluminum foil is used to stamp the surface of the substrate under a certain temperature and pressure. Anodized aluminum foil is much cheaper than gold foil, so it is widely used, and various colors and materials have been developed. At present, the bronzing process is widely used in exquisite packaging or trademarks, calendars, book covers, etc.... all kinds of printed matter.

However, customers often ignore some realistic conditions when making bronzing parts. The following general directions are sorted out for you:

1. Considering the cost, basically a zinc plate is needed before hot stamping on the paper. During production, the zinc plate will be heated and then pressed on the aluminum foil, so that it can be printed on the paper, whether it is a zinc plate or a bronzing aluminum foil, They are all priced by area, so the larger the area of bronzing, the more expensive it will be, so if you have budget considerations, you should consider the size of bronzing.

2. The area of the printed matter itself will also affect the production of bronzing. For example, in the most common business card production, the bronzing position of the guest is too close to the edge of the business card or on the edge, then we must increase the original printing area and cut it after bronzing Cut it, so that it will not be able to be gilded or easily damaged. Of course, the cost of the printing part will also increase accordingly. Or there is another kind that needs to be folded or formed after bronzing, which will also change the production method or increase the cost.

3. Although the current technology is very advanced, the fineness of bronzing is still limited! Of course, each processing factory may have different capabilities, but in general, if there are lines or thin blanks in the pictures of bronzing, try your best to Let him have a width of at least 0.3mm, otherwise it is easy to break or unclear.

4. Customers often take samples and ask if they can be gilded for the sake of the exquisiteness of the finished product. Bronzing will also have different production difficulties depending on the paper material, as well as the problem of processing sequence. In addition, each processing factory can do it differently, and there are many variables in production. Therefore, not every kind of paper can be gilded, especially if the surface has a lot of texture or a little uneven, it is best to ask the manufacturer before making it, so as not to be confused.

5. If you want to match bronzing and other types of processing, for example, the customer wants to make bronzing + embossing, the bronzing part and the embossing part, if the bronzing and embossing part are simple in shape at this time, there will be no problem. But at this time, if the bronzing part is too small or too small, or the paper is not thick enough, it will not be able to be made, because it is easy to break or the effect is not good, and the bronzing position is not easy to align, and the production will be difficult. Difficulties. Or it is necessary to increase the damage and increase the number of productions, but this is also a very labor-intensive thing, and it cannot be guaranteed to be produced. Therefore, it is recommended that when there are special needs, it is still necessary to ask the manufacturer's own ideas whether it is feasible.

6. There will be a basic price for processing, that is, if the amount is not full, it will be calculated according to the amount. The price varies according to different processing methods, and if the amount of production is too small to be produced by machine, it will become hand-made. Therefore, the price will also increase, so when there is a small amount, it will be brought home by the customer to do handicraft, so as to save the processing cost. The hot stamping part will have a hot stamping fee for the zinc plate and hot stamping. Of course, it is impossible to make hot stamping at home, so when the amount of hot stamping is too small, you must be mentally prepared that the processing fee will be relatively high.

In the past, hot stamping was used to make hot stamping. In the past ten years, cold stamping has been developed. Compared with hot stamping, it has many advantages, including time saving, energy saving, environmental protection and more color changes. Cold stamping is specially used. Glue transfers the cold foil to the printed matter in a way similar to printing ink, so it can also be combined with printing four colors to create a richer effect.